诚信为本,市场在变,诚信永远不变...
  咨询电话:18615230460,13001713438,0531-88080953

研磨/分散/匀浆

  • 研磨机  MultiDrive control MT Package
研磨机  MultiDrive control MT Package

研磨机 MultiDrive control MT Package

Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes MT 150 and the required TC 1 protective housing for dry samples.  

MT 150 is a disposable tube with a typical stainless steel beater. The plastic milling tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the milling tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the grinding chamber can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery.  

MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively.  

High performance
Excellent crushing performance is guaranteed by a combination of
variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,
and a 1000 Watt output.

Interval operation
The option of interval programming is simple to activate at the
press of a button. Interval operation is an asset during the coarse
crushing of hard samples or for extra thorough blending.

Integrated cooling
A cooling system is integrated in the milling cup, which allows
indirect heat dissipation. Thus, coolant and sample remain separate.

TFT-display
A clear TFT-display guarantees user-friendly operation.

Temperature measurement
MultiDrive control offers temperature measurement and vessel
recognition using RFID. A temperature limit can be set for
temperature-sensitive materials, or for specific planned reactions to
protect against overheating.

Weighing function
The weighing function is also integrated into the user-friendly
workflow of the IKA MultiDrive control. Weighing is performed
before crushing using the same mixing cup, so that no transfer
of contents is required.  

交货清单

  • IKA MultiDrive control

  • MultiDrive TC 1

  • IKA MultiDrive MT 150.5

工序类型分批处理
工作原理切割/冲击/混合/分散
电机输入功率1000  W
电机输出功率800  W
速度范围3000 - 20000  rpm
速度偏差5  ±%
工作时间   开5  min
工作时间  关10  min
电机原理无碳刷直流马达
显示屏TFT
RFID读写器单元
温度显示
温度测量精度0.1  K
温度测量精确性±1  K
最低温度限制。-50  °C
最高温度限制。120  °C
监控维护时间
称重功能
称重范围5 - 4000  g
称量分辨率1  g
最大称重能力4  kg
称量准确度±(0.3%+2) g
腔体识别
编程功能
外形尺寸300 x 350 x 250  mm
重量8.5  kg
允许环境温度5 - 40  °C
允许相对湿度80  %
DIN EN 60529 保护方式IP 31
USB接口
Bluetooth接口
电压220 - 240 / 100 - 120 / 100 - 115  V
频率50/60  Hz
仪器输入功率1000  W